Dimplex LIA 12IM, Installation And Operating Instructions Manual

Page: 51 / 168

www.dimplex.de EN-17
Englis
h
9.2
Notes:
 The timer can be set with six programs for every weekday
(Monday to Sunday).
 The same timer settings can be programmed for several
days.
 Up to 6 switching operations can be set for each weekday,
creating increased energy savings.
9 Cleaning and maintenance
9.1 Indoor unit
ATTENTION!
Before opening the device, ensure that all circuits are disconnected from
the power supply.
Cleaning instructions:
 Do not use benzine, thinner or
scouring powder.
 Only use soap or a neutral household cleaner (with a pH
value of around 7).
 Do not use water that is hotter than 40°C.
9.1.1 Indoor unit and operator panel
 Do not spray directly with water.
 Wipe the device with a soft, dry cloth.
9.2 Outdoor unit
 Do not close off air inlet and outlet openings, as this can lead
to a reduction in performance or to failures. Obstructions
must be removed to guarantee the supply of air.
 During winter, any snow in the vicinity of the outdoor unit
must be removed to prevent the air inlet and outlet openings
becoming blocked.
Function Step
Calling up the timer Press .
Setting the date
and
time
1) Press / to select the required
weekday.
2) Confirm your setting by pressing
3) "1" flashes on the display. Press
to set program 1.
4) Press to select the switch-on or switch-off
timer.
5) Press / to select the required
time.
You can use or to set other operating
modes in addition to the switching time.
6) Press to confirm program 1. The selected
weekday is identified by the symbol

.

After 2 seconds, the display changes to the
next program.
7) Repeat steps 4 to 7 to set
programs 2 to 6.

If no buttons are pressed for 30 seconds when
making the timer settings or if the button is
pressed, the current setting is adopted and the
setting procedure terminated.
6(/(&7
6(/(&7
2))21
02'(
48,(7
6(7
6(7
Changing or
adding timer
programs
Repeat the steps described above.
Deactivating
the timer
Press , followed by .
Activating
the timer
Press , followed by .
Checking the timer
program
1) Press .
2) Press / until the required
weekday is displayed. Then press
to confirm the selection.
3) Press / to check the
programs that have been set.
Deleting timer
programs
1) Press .
2) Press / until the required
weekday is displayed.
3) Then press to access the program settings.
4) Press / until the required
weekday is displayed.
5) Then press to delete the
program.
&$1&(/
6(7
6(/(&7
6(/(&7
&$1&(/
03D
7,0(5 287'225
+($7
6(77,1*
67$786
3803':
%2267(5
48,(7
7$1.
:$7(5287/(7
&
&
2)) 21
+($7(5
23(5$7,21
)25&(
+($7(5
$&78$/
7,0(5
021 78( :(' 7+8 )5, 6$7 681
62/$5 5(027(
127$9$,/$%/(
21
2))
0$120(7(5)h5:$66(5'58&. 0$120(7(5)h5:$66(5'58&.
03D
‡1LFKWPLWKDUWHQRGHUVSLW]HQ
*HJHQVWlQGHQJHJHQGLH
*ODVDEGHFNXQJGUFNHQRGHU
VFKODJHQGDGLHVHGDGXUFK
EHVFKlGLJWZHUGHQNDQQ
‡'HU:DVVHUGUXFNVROOWHLQHLQHP
%HUHLFKYRQELVEDUOLHJHQ
‡:HQQGHU:DVVHUGUXFNDX‰HUKDOE
GLHVHV%HUHLFKHVOLHJWZHQGHQ
6LHVLFKDQ,KUHQ)DFKKlQGOHU