16
www.dimplex.com
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the whole
unit off and it will not come back
on without being reset. It can be
reset by turning the unit off at the
main disconnect panel and waiting 5
minutes before turning the unit back
on.
CAUTION:
If you need to
continuously reset the heater,
unplug the unit and call technical
support at 1-888-346-7539.
Remote Control Battery
Replacement
To replace the battery:
1. Slide battery cover open on the
remote control.
2. Correctly install one 3 Volt
(CR2032 [longer life] or CR2025)
battery in the battery holder.
3. Close the battery cover.
Battery must be recycled or
disposed of properly. Check
with your Local
Authority or Retailer for recycling
advice in your area
cycling and holds the unit on the
preferred color, indicated by a "U"
- Unfreeze or a "F" - Freeze on
the display.
G. Brightness
Changes the brightness of the lights
in the unit.
→ Adjusted by repeatedly pressing
the corresponding button on the
remote.
•
Indicated by the second digit on
the Floating Display™ changing to
show: "H" (high), and "L" (low).
H. Sleep Timer
The Sleep Timer can be set to
automatically shut off the fireplace
after a preset time (from 30 minutes
to 8 hours).
→ To set the timer press the timer
button on the remote, repeatedly,
until the desired time is displayed.
• The Floating Display
TM
will display
the different times as it is adjusted.
Once the timer has begun,
pressing the
button will display
the time remaining before the unit
turns Off.
!
NOTE:
The Sleep Timer can be
cancelled at any time by
pressing
the
button repeatedly until the
sleep timer displays nothing.
Operation
