Dimension One Spas Bay Collection, Owner'S Manual, Page: 68 / 72

2004 Bay Collection
Owner’s Manual
Troubleshooting Guide
Heating System
Symptom Problem Corrective Action
1. Temperature setting is
too low 1. Turn up the thermostat
2. Dirty filter 2. Clean filter
Does not heat
3. Flow switch malfunction 3. Call for service
1. Temperature setting is to
high 1. Turn down the thermostat Too hot
2. High limit tripped 2. Call for service
Erroneous
temperature of
32
°
F (
≅
0
°
C)or
136
°
F (
≅
57.8
°
C)
appears on the
display
Possible temperature sensor
failure Call for service
Hot Tub
Temperature
erratic Water level
Fill with water to the bottom of the OptiMount
®
located next to the
Skimmer Basket.
1. Too much filtration 1. Reduce the number of filter cycles and/or the filter cycle duration
2. Temperature setting too
high 2. Turn down the thermostat
Display reads
OVERHEAT
3. High limit or sensor
problem 3. Call for service
62