Dimension One Spas Bay Collection, Owner'S Manual, Page: 32 / 72

2004 Bay Collection
Owner’s Manual
When the Water Feature Button is pushed the pump controlling the fountain
is activated. A second push will turn the pump off. Each time the Water
Feature Button is pushed it activates a programmable, automatic shut-off cycle.
The default time is 1 hour. Your choices are 1, 2, 3, or 4 hours.
See the section on
Programming the Scrolling Message Center for details on
changing the automatic shut-off cycle.
Water Feature Button
The automatic shut-off cycles are a safety device that will reduce
wear and tear on your equipment and reduce energy costs by
ensuring that your pumps don’t run constantly.
When the Up or Down Button is pushed to change the set temperature, the
bottom left of the Digital Display Window will read “SET TEMP TO _ _ _
°
F”.
After 5 seconds, the display will automatically display the current water
temperature again. The water temperature may be adjusted from 59
°
F (
≅
15
°
C)
and 104
°
F (
≅
40
°
C).
Up / Down Buttons
These buttons are also used to make custom selections when you
are programming the Scrolling Message Center. See the section
on
Programming the Scrolling Message Center for more details on
changing your spa’s default settings.
26