8
Before you can ride your new bike, there are several thing to check over to
make sure that it is safe to ride.
Seat
It is important to be comfortable while riding, with this in mind
the Dillenger Cheetah is fitted with a plush double-sprung
saddle. The height of the saddle can be adjusted by undoing
the fastening bolt, moving the seat to the desired height, then
re-fastening the bolt.
The angle of the saddle
can also be adjusted. To do
this undo the nuts under the saddle, rotate the saddle to the
desired angle, re-tighten the nuts. It is recommended to check
that these nuts are tight before riding.
Fault
Solution
My saddle is at an uncom-
fortable angle
Undo the adjusting nuts, adjust the angle of the saddle, and
retighten the nuts.
My saddle is loose and
turns when I ride
Height adjustment bolt is too loose, tighten it.
My saddle is loose and
turns when I ride
Saddle adjustment nuts are loose, tighten them.
Installing the Front Wheel
●
Place the front wheel in the front fork drop out slots and
ensure the wheel fits correctly.
●
Ensure that the locking tabs are correctly mounted into the
holes in the forks.
●
Fully tighten both nuts and ensure the wheel sits straight in
the forks.
SetuP