Dillenger Cheetah User Manual Download Page 7 | Manualshive

Page: 7 / 23

Dillenger Cheetah User Manual Download Page 7

Your First Ride

When you buckle on your helmet and go for your first ride, be sure to pick an area away from
cars, other cyclists, obstacles or other hazards to become familiar with the controls, features
and performance of your new electric bike. We suggest you start riding with the electric motor
turned off until you are comfortable, before using the electric assistance.

Preventing Injury or equipment damage

The instructions provided in this document are a guide only. The specific components received
may vary slightly. If you are in doubt about any aspect of the assembly of the bike see help from
a skilled bicycle mechanic.

7

SaFetY WaRNINg

Safety First!

Always wear an approved helmet when riding your Dillenger electric bike and follow the helmet
manufacturer’s instructions for fit, use and care of your helmet.

Mechanical Safety Check

Routinely check the condition of your bike before every ride. Make sure no nuts, bolts or spokes
are loose. Perform a visual inspection of the whole bicycle before every ride. Make sure tires
are correctly inflated within the range given on the tyre sidewall. Check the brakes for proper
operation.

«
...
5
6
7
8
9
...
»

Summary of Contents for Cheetah
























Reviews:

No comments