5
QuICk StaRt guIde
Remove Bike
Take your bike out of its box. Check the box for the
additional parts such as chargers, or any parts that may
have come loose in shipping. Remove the protective
packaging and any zip ties that secure the bike for transit.
Keep track of all the parts that you remove from the box
and bike. – Remove the battery and put it on charge.
1.
Saddle & Pedals
Loosen the seat high adjustment bolt on the frame and insert
the seat tube. Adjust it to your desired height and tighten.
The angle of the seat can be changed to suit your preference.
Please check that the bolts are tight before riding. The pedals
will need to be installed before you can ride. They have “L” and
“R” stamped into the end of the threaded part, this refers to
the side of the bike that they fit. The right hand pedal does up
clockwise, whereas the left hand pedal does up anti-clockwise.
3.
Ride!
Once the battery is fully charged lock it into the frame
and turn it on with the key at the top of the battery.
You’re now ready to go!
5.
handlebars & Wheels
Lift the front of the bike up and offer the wheel up to the
bike. Seat the axle into the front dropouts and secure the
wheel in place by doing up the axle nuts. The handlebar
folding-joint is secured by an Allen bolt which is hidden
when the handlebar is fully upright position. To tighten
this, align the handlebars so that they are straight, fold
the joint to the side and tighten the bolt.
2.
Pre Ride Checks
You’re nearly there. Check that the tyres are pumped
up to the pressure recommended on the tyre side wall.
Check that the brakes are tight, centred and do not rub.
Go over all nuts and bolts and make sure they are done
up.
4.