Dillenger Cheetah User Manual Download Page 15 | Manualshive

Page: 15 / 23

Dillenger Cheetah User Manual Download Page 15

lights

15

Suspension

The suspension on the Cheetah has a small amount of
adjustment. The stiffness of the shock can be adjusted by
winding the lower part of the shock in or out. This will also
have a small impact in the ground clearance and seat height.

Fault

Solution

the light won’t turn

on

Check that the battery is turned on.

The Cheetah is fitted with a built in headlight. This unit is
powered off of the main battery and is switched on an off by
a button found next to the left hand handlebar grip. Press
the button to turn the light on, and press it again to turn the
light off. The light will also turn off when the battery switch is
turned off. The rear of the bike is fitted with a red reflector. If
you intend on riding at night it is highly recommended to fit a
rear light.

PleaSe Note

When riding at night it’s your responsibility to familiarise yourself with
the laws of the areas where you ride and to comply with all applicable
laws.

Fault

Solution

the suspension is too

soft

Tighten the shock and make sure all the bolts are tight.

«
...
13
14
15
16
17
...
»

Summary of Contents for Cheetah
























Reviews:

No comments