Digitus Wireless 150N PCI Adapter, Manual

Page: 63 / 92

56
4. Before you start to establish the wireless connection by using
WPS, you can click ‘Rescan’ button to search for WPS-enabled
access points near you again, to make sure the WPS function of
your access point is activated.
All access points with WPS function enabled will be displayed
here. Please make sure the access point you wish to connect is
displayed. If not, please click ‘Rescan’ few more times. You can
also click ‘Information’ button to see the detailed information
about selected access point.
5. Start PBC pairing procedure at access point side (please refer to
the instruction given by your access point’s manufacturer), then
click ‘PBC’ button in wireless configuration utility to start to
establish wireless connection by WPS. Please be patient (This
may require several seconds to one minute to complete). When
you see ‘WPS status is connected successfully’ message,
means the connection between this wireless network card and
access point is successfully established by WPS, and the
information about access point you connected to will be
displayed.