Digitus Wireless 150N PCI Adapter, Manual, Page: 41 / 92

34
If you need to use protected authentication credential,
check ‘Use protected authentication credential’ box,
and click ‘Import’ to load .pac credential file; to remove
a loaded credential file, click ‘Remove’.
Session
Resumption You can enable or disable session resumption here. If
you don’t know if you should enable session
resumption or not, please ask your 802.1x
authentication administrator.
ID \ Password
tab Input 802.1x username (ID) and password and other
information if it is required here. Click ‘Show Password’
to show the password you typed.
Client
Certification
tab Use this tab to select a local certificate from dropdown
menu. If the access point you wish to connect required
a specific client certificate, the certificate must be
installed on your computer, and you can select the
certificate here.
Server
Certification
tab Use this tab to use server-based certification. Please
select a CA (Certificate Authority) from dropdown
menu. If intermediate certificates are allowed, please
select ‘Allow intermediate certificates’. Also, if you need
to specify CA server’s name, you can specify it in
‘Server name’ field. You can select ‘Server name must
match’, so the CA server’s name must be the same with
the value you set in ‘Server name’ field; If only the
domain name part of full server name must the same
with the value you set in ‘Server name’ field, select
‘Domain name must end in specified name’.