Digitus Wireless 150N PCI Adapter, Manual, Page: 74 / 92

67
Tx BURST Check this box to accelerate the data transmit
rate. It may not work with all wireless access
point and wireless devices.
Beacon(ms) You can define the time interval that a beacon
signal should be send. Default value is 100.
Do not modify this value unless you know
what will be affected.
TX Power You can select the wireless output power
here. Please select a proper output power
setting according to your actual needs. You
may not need 100% of output power if other
wireless clients are not far from you.
Idle Time Select the idle time for the wireless access
point. Default value is 300. Do not modify this
value unless you know what will be affected.
To save changes, click ‘Apply button. Or you can click ‘Default’ to
reset all values to factory default value.