Digitus DN-13014-3 User Manual Download Page 63

Page: 63 / 92

TCP/IP Protocol Installation

1. Click

Start

, point to

Settings

and select

Control Panel

Double click the

Network

icon.

3. If

the

TCP/IP

Protocol

is not already installed, click

Add

4. Select

Protocol

and click

Add

5. Select

Microsoft

from the Manufacturers list.

6. Select

TCP/IP

Protocol

from the Network Protocols list.

Specify an IP address, Subnet Mask, and Gateway address or specific “Obtain IP
address automatically”, if a DHCP server is available on the LAN.

Restart the computer.

9. Done.

Note:

Using TCP/IP protocol to access the print server requires well-configured TCP/IP

settings. If you are not familiar with these settings, please consult your network
administrator for details or ask for help.

IPX/SPX-compatible Protocol Installation

1. Click

Start

, point to

Settings

, and select

Control Panel

Double click the

Network

icon.

3. If

the

IPX/SPX-compatible Protocol

is not already installed, click

Add

4. Select

Protocol

and click

Add

5. Select

Microsoft

from the Manufacturers list.

6. Select

IPX/SPX-compatible Protocol

from the Network Protocols list and follow the

instructions on the screen.

Restart the computer.

8. Done.

Summary of Contents for DN-13014-3





























































































Search results

Summary of Contents for DN-13014-3

Reviews:

Related manuals for DN-13014-3

Brands by name

Popular brands

Digitus DN-13014-3, User Manual

Search results

Summary of Contents for DN-13014-3

Reviews:

Related manuals for DN-13014-3

Brands by name

Popular brands