Digitus DN-13014-1 User Manual Download Page 23

Page: 23 / 173

2. Hardware Installation

1. Unpack the print server package and verify that all

the items listed in the section 1.2 are provided.

2. Connect the print server to the printer you want to

share on the network.

3. Connect the print server to your network by attached

the network cable to the UTP port of the print server.

4. Connect the power adapter to the print server. The

print server will perform the Power-On-Self-Test (POST)

after it is powered on. During the POST, the Status LED

will be on. When the LEDs are unlighted, the print server is

ready.

NOTE1: MUST use the power adapter shipped with the print

server, do NOT use any other power adapter from any
sources.

NOTE2: To prevent the compatibility problem between print

server and a few printer, it is recommended that you
power on the print server before the printer.

Summary of Contents for DN-13014-1














































































































































































Search results

Summary of Contents for DN-13014-1

Reviews:

Related manuals for DN-13014-1

Brands by name

Popular brands

Digitus DN-13014-1, User Manual

Search results

Summary of Contents for DN-13014-1

Reviews:

Related manuals for DN-13014-1

Brands by name

Popular brands