Digitus DN-13007 User Manual Download Page 70

Page: 70 / 87

Cc: stands for carbon copy; enter an e-mail address to send that mail
to a second person.

SMTP Server requires authentication: login to remote SMTP server
which requires authentication.

Account Name: enter account name for remote SMTP server.

Password: enter account’s password for remote SMTP server.

Maintenance: If you want to restart the Server, restore the Server to factory
defaults, download new firmware file from product’s public website and
upgrade new firmware, you can use the Maintenance tool.

Restart Server: click this button, the Server will restart.

Factory Default: click this button, the Server will restore factory default
values.

Download New Firmware: click this button to download new firmware
or user software from this product’s public website.

Upgrade Firmware: click Open to find the firmware file to be upgraded.
Click Upgrade to upload the firmware into the Server.

Summary of Contents for DN-13007
























































































Search results

Summary of Contents for DN-13007

Reviews:

Related manuals for DN-13007

Brands by name

Popular brands

Digitus DN-13007, User Manual

Search results

Summary of Contents for DN-13007

Reviews:

Related manuals for DN-13007

Brands by name

Popular brands