D.
Click the server. Then all USB devices attached on the server will be shown.
E.
Please follow the user manual of the USB device to do the driver installation. For
example, you may put the driver CD of the USB device in the CDROM to install the
driver.
F.
When you are asked to plug in the USB device into PC’s USB port, either before
running the driver setup program or during the execution of the driver setup
program (This depends on the USB device. Please check the user manual from
the vendor.), click the desired USB device in the Control Center and then click the
“Connect” button to do the connect operation and get the ownership of the USB
device, as the following figure. The computer name of the device owner will be
shown at the end of the device.
56
Summary of Contents for DN-13007
