Problems related to HDD
or Remote Controller
1. In case that MULTIMEDIA CENTER does not recognize HDD
Check whether the root folder or specific folder contains too many files. In
this case, make sub folders and move some files to the sub folders to
reduce files number in specific folder.
Check whether HDD is connected with NTD35 properly(Check IDE flat
cable and power cable)
Check whether HDD is formatted properly( It should be based on ‘Primary
partition’ and you must not check ‘file and folder compression’ option in
formatting HDD)
Check HDD jumper setting(It must be set as ‘Single’ or ‘Master’)
Try changing with new HDD(There may be some problem in HDD itself
caused by impact or damage from outside.)
2. In case that PC does not recognize MULTIMEDIA CENTER as external USB
mass storage.
If PC is operated by Windows 98SE, you need to install the USB driver for
Windows98SE into your PC properly.
Check whether MULTIMEDIA CENTER is powered ON.(It should be powered
ON)
Try changing with new HDD(There may be some problem in HDD itself caused
by impact or damage from outside.)
3. In case that Remote Controller does not work properly.
Check if there is any obstacle between remote controller and IR Receiver of
MULTIMEDIA CENTER
Check battery of remote controller.
Check whether the IR receiver is exposed to strong light such as direct sun light.
71
Summary of Contents for DA-70900
Page 1: ...English User s Manual ...
