Digitus DA-70254, User Manual

Page: 28 / 29

Finish.
5. Troubleshooting
5.1 Frequently Asked Questions
1. Why can’t I connect my USB device to my computer through Network USB over IP Server?

Make sure the USB device functions normally when you plug it into your computer
via USB cable.

If the USB device, such as USB printer or multi-functional printer, requires a driver,
please make sure you have installed it on the computer you wish to use. Rebooting
your computer after installing USB device driver might also help.

Although the Network USB over IP Server could work with a very wide spectrum of
USB devices, it still has limited support on some USB devices. Please refer to the
supported device list for details.
2. Why can’t I see any servers on my Network USB over IP Server listing window after
installing it?

Please make sure that all of your Network USB over IP Servers is correctly
connected to your network. Also, certain anti-virus programs come with firewall
functions that might prevent the Network USB over IP Server setup utility from
accessing the network. Please make sure the Network USB over IP Server setup
utility is not being blocked by your anti-virus program.
3. The connected USB devices are disconnected after my computer wakes up from the
computer stand-by?

Connected devices will automatically be released for other network users in case
you forget to release them. Please reconnect the USB devices again after your
computer “wake up”.