10
and then cancel, and the reading will be suspended; in the paused reading state, also maintain the
trigger level above 50ms and then cancel to continue reading.
Continuous mode
1.
Reading interval time
It refers to the interval time required for the next reading after the reading is successful. During this
interval, no acquisition and reading are performed. Read the following setting codes to set the
reading interval. The setting range is 0ms
～
25500ms, and the default duration is 1000ms.
No interval
200 ms
500 ms
**1000 ms
3000 ms
5000 ms
2.
Same code reading delay
In order to avoid the same bar code being read multiple times in continuous mode, you can request
the read module to delay the set time in this mode before allowing the same bar code to be read.
The same code reading delay refers to the refusal to read the same bar code within the set time after
reading a bar code. Only after the duration has expired can it be read and output. By default, the
same code reading delay is turned off.
The same code reading delay open
**The same code reading delay off
