28
Screws mounting position instruction
Computer Device Installation
Note:
Before the installation, make sure that the equipment is powered off. To prevent damage to the
equipment during installation, make sure that all the devices installed are well grounded.
VGA KVM module installation
To install a single-level KVM, refer to the following diagrams (numbered in the order of steps on the graph)
and do the following:
1.
Plug your USB keyboard and mouse into the USB console port if 2
nd
console needed.
2.
Using a set of KVM cables corresponding to the model, plug the VGA connector into the VGA Port of
any available VGA port on the switch.
3.
Plug the corresponding VGA video connector, USB or PS/2 connector of the KVM cable into the
corresponding port on the Computers.
4.
Plug the power adapter supplied with this package into the AC power source, and plug the other end of
the power adapter into the power jack on the switch.
5.
Connect the network cable to the IP port of the IP module if IP module is equipped.
6.
Turn on the computer.
Summary of Contents for DS-72210
