Standard Caller ID Display
Automatic Caller ID Call Routing
Caller ID service from your phone company
is required for Digitone’s Call Blocker to
work. The first call
to your Call Blocker unit
will initialize the
Clock and Date
to the
current date and time. Automatic call
routing will begin to work right after the
first call when Caller ID information is
displayed. Note that during
Daylight
Savings Time
changes, the phone
company is responsible for updating their
clock data when delivering the caller ID
information.
Clearing Display
To delete a single number from Call History, use the
Up or Down
arrow keys to select the number you
want to remove. Notice the number has dashes between the digits, Ex. 602-555-1234, Press and hold the
Block Button for 3 seconds, then see “Release Button”. Release the button to clear that displayed call.
To Remove the entire Call History
, if a number has dashes between the digits, wait until the dashes
are removed, Ex. 6025551234 and only the number shows, then Press and hold the Block Button for 3
seconds, you will then see “Release Button”. “CID List Deleted” will then display, clearing all call history.
Viewing Call History
The left Up arrow button displays the previous calls or Top of List. The right
button Down arrow button displays the last call or End of List. When
Call History
starts to fill up with
calls, you can jump to the
Top of List
or the
End of List
by pressing and holding the Up arrow key to
go to the Top of List or pressing and holding the Down arrow key to go to the End of List.
Caller ID Display Buttons
The display is normally in
Protected Mode
, Ex. 6025555555, shown
on the display to prevent accidental number entries to a list. To add Blocked, Invited or VIP list entries,
you must use the
Up
or
Down
viewing buttons to select a displayed number which will then show the
numbers with dashes between the digits, Ex. 602-555-5555. This allows you to add a number to a list.
Blocking Callers
can be enabled using the
Up
or
Down
viewing buttons and pressing the
Block
button
Twice
quickly on the front panel.
“NBR Blocked”
will display and the light indicator will flash to
show that call is now on the
Blocked Call List
. When a blocked caller calls in, the caller ID will display
their number and
“Blocked”
with the light flashing to show the call is being answered and hung up on.
Inviting Callers
can be enabled using the
Up
or
Down
viewing buttons then, press and hold the
Invite
button for one second on the front panel and you will then see “Release Button”. Release the
button and you see
“NBR Invited”
. The light indicator will flash to show that call is now on the
Invited Call List
. When an invited caller calls in, the caller ID will display their number and
“Invited”
.
Inviting VIP Callers
can be enabled using the
Up
or
Down
viewing buttons and pressing the
Invite
button
Twice
quickly on the front panel.
“NBR VIP”
will display and the light indicator will flash to
show that call is now on the
VIP Call List
. When a VIP caller calls in, the caller ID will display their
number and
“VIP”
.
3
