To set the Vocoder mode split point:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu.
3. Press the softkey corresponding to
Voco
.
4. Use the softkeys to select either the above/below or note number
fields. Use the Data Wheel to modify the settings.
5. Press the Utilities button once again to exit; this returns you to the
mode from which you entered.
MIDI Song Utilities
The MIDI Song Utilities allow you to have full MIDI control over the
reception and transmission of Song Selection, Song Mapping, and Song
Steps.
Songs you have created in the Vocalist Workstation EX can be selected
via external
MIDI Song Select
messages sent from devices capable of
sending them. The front panel of the Vocalist Workstation EX can be
used to send Song Select messages to other devices such as your
sequencer in order to automate song changes during performance.
The MIDI Song Select receive and transmit options are:
¥
off
Ignore MIDI Song Select messages
¥
receive
Enable external MIDI Song changes
¥
transmit
Transmit front-panel Song changes
¥
r transmit
Receive external and transmit front-
panel Song changes
To change the MIDI Song Select receive/transmit
option:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu.
3. Press the softkey corresponding to Song.
4. Use the Data Wheel to select the desired Song Select option.
5. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
The
MIDI Song Mapping
feature allows you to change the relationship
between incoming Song Select messages and which song is actually
loaded.
Note: The split
point is only
available for the
single channel
Vocoder modes.
40
Summary of Contents for VOCALIST Workstation EX
Page 1: ...VERSION EX 1 2...
