8
Back Panel
1
2
3
4
5
6
7 8
1) Power Switch
Turns the Vocalist Workstation EX on and off.
2) Power Input
Use only the Harmon Pro Group PS750
9.75V AC, 820 mA
power adapter
supplied with this unit.
3) MIDI section
The MIDI input receives MIDI control and program information from
external MIDI devices such as keyboards and sequencers.
The MIDI output transmits system, specific button pushes and program
information which can be recorded and played back externally from a
sequencer. It also can transmit bulk system exclusive data to allow back-
up of user data on a MIDI sequencer or voice librarian.
The MIDI Thru jack transmits an exact copy of any MIDI information
received at the MIDI input.
4) Footswitch input
This is for connection to a DigiTech FS-300 footswitch to provide
remote control of Bypass, Program and Song functions.
5) Headphone output
1/4" stereo jack for headphones.
6) Left and Right outputs
These are the main mix outputs. They are TRS (tip, ring, sleeve) type to
send balanced or unbalanced signals, depending on the number of con-
ductors in the connecting cable. These produce a n4 dBu signal
level when the Lead, Harmony, Reverb and Output level faders are set at
their respective nominal bumps. For devices that operate at -10 dBu,
reduce the output level with the Output level fader.
A jack connected to the Left output only will receive a mono sum of the
stereo mix.
7) Line input
This jack accepts mono line level audio from an external source. The
connector is TRS to accept balanced or unbalanced signals. This jack
overrides the mic input jack.
The +4/-10 switch matches the Vocalist Workstation EXÕs line input
level to the output level of your mixer. Consult your mixer manual to
determine itÕs output level. This is important to match correctly as excess
noise or distortion can result.
8) Mic input
Balanced XLR jack for microphone-level signals. A cardoid, 1 kOhm-
impedance type microphone is preferred.
Summary of Contents for VOCALIST Workstation EX
Page 1: ...VERSION EX 1 2...
