DigiTech VOCALIST VL3D -, Owner'S Manual

Page: 9 / 32

5
Display 13.
This display shows the Guitar Sensitivity, Guitar Tuner target note, selected
Key in Acappella mode and is used for the MIDI Configuration Menu.
Musical Indicators
14.

#
In Acappella and Tuner modes, this indicates the selected Key/Note shown
on the Display as being Sharp or Flat.
Maj Min
In Acappella mode, this defines the selected Scale as Major or Minor.
Tuner
15.
Pressing this button will both enter and exit the Guitar Tuner.
Key – 16.
In Acappella mode, this button is used to cycle through the available Key
selections. In the MIDI Configuration Menu, this button is used to cycle
back through the parameter options.
Scale + 17.
In Acappella mode, this button is used to toggle the Scale between Major
and Minor. In the MIDI Configuration Menu, this button is used to incre-
ment through the parameter options.
MIDI 18.
Pressing this button enters the MIDI Configuration Menu and cycles
through the five configurable options. The button lights to indicate the
MIDI Configuration Menu is in use. This menu is automatically exited after
cycling past the last item. To exit the menu earlier, hold the MIDI button
until the LED turns off.
Harmony Patch 19.
This button cycles through the five Harmony Patches on the currently
selected bank defined by the A/B button color. To save altered harmony
settings to the current Harmony Patch and the current A/B part, hold the
Harmony Patch button until the selected Patch Number flashes.
Note: You must save each A/B part individually.
Harmony Patch Number
20.
This indicates which of the five Harmony Patches is presently selected.
Note that each Harmony Patch has two harmony settings defined by the
A/B button and color.