DigiTech VOCALIST VL3D -, Owner'S Manual

Page: 10 / 32

6
Mode 21.
Pressing the Mode button cycles through the four Harmony Modes; mu-
sIQ
®
MIDI, musIQ Guitar, Acappella and Notes.
Gender
22.
There are individual Gender controls for each of the two Harmony Voices.
By pressing the Gender button of the corresponding Harmony Voice, you
can cycle through the Gender shifts from Male (M) to Female (F) as indi-
cated on the Gender Display above. Note that when there are no bars lit
on the Gender Display, the Gender setting is disabled for the correspond-
ing Harmony Voice.
Voicing
23.
There are individual Voicing controls for each of the two Harmony Voices.
By pressing the Voicing button of the corresponding Harmony Voice, you
can cycle through the Voicing options as indicated on the Voicing Display
above. Note that when there are no bars lit on the Voicing Display, the
Voicing shift is disabled for the corresponding Harmony Voice.
Note : The exact note choice of the various Voicing shift settings depends
on the Harmony Mode selected and related variables such as current note
or chord, chord history and lead voice note.
Harmony Mix 24.
This adjusts the mix of Lead Voice with the Harmony Voices at the outputs.
With the knob fully counter-clockwise, only the Lead Voice is present at
the outputs with no Harmony Voices. With the knob fully clockwise, only
the Harmony Voices will be heard at the outputs with no Lead Voice.
Humanize 25.
This adjusts the amount of naturalness of the Harmony Voices. The intent
is to make the harmonies sound more like real backup singers by introduc-
ing variations in the timing and pitch. Fully counterclockwise makes the
harmonies follow the lead very tightly. Fully clockwise and the harmonies
are quite loose.
Harmony On / Off 26.
This button turns the Harmony Voices on and off. When the button is lit,
the Harmony Voices are enabled. When the light is off, the Harmony Voices
are disabled.
Part A / B 27.
This button toggles between the A and B Parts of the selected Harmony
Preset. Green indicates Part A, red indicates Part B.