DigiTech RP70, Owner'S Manual

Page: 35 / 48

29
ferent notes. Settings are
h1-h9
.
DigiTech
®
Whammy™
The DigiTech
®
Whammy
TM
is an effect that uses an optional Expression Pedal to bend the pitch
of the incoming signal, or add a bendable harmony with the original signal. As the Pedal is moved,
the note bends either up or down. When DigiTech Whammy is selected, it is automatically placed
before the Amp modeling as shown in the block diagram on page 20. Settings are
H1-H9
.
Delay
Delay is an effect that will record a portion of the incoming signal, and then play it back a short
time later. The recording can repeat just once or several times.
The RP70 offers four different delay models (Analog Delay, Digital Delay, Pong Delay, and Tape
Delay), each with 5 seconds of delay time available. There are two different parameters used to
program the delay: Delay Variation and Delay Time. The first parameter of the delay effect is Delay
Model type and Variation, which varies the amount of feedback (number of repeats) and level. The
second delay parameter is Delay Time. This is indicated by a value 1-99 (10ms-990ms), 1.0 - 5.0 (1
- 5 seconds respectively in 100ms increments) in the Preset Number display when the Delay LED
is lit. Delay settings are listed on the following page.