DigiTech RP-20 VALVE, User Manual

Page: 48 / 107

Out L - R Controls the output level of the left or right side of the flanger. Ranges from Off to 100%.
Pedal Phaser
The Pedal phaser is a phaser that can be controlled by an expression pedal to control the depth and feedback of the effect
Pedal Phaser Parameters
FX and Dry Level Controls the FX and Dry level of the Pedal Phaser module. Ranges from Off to 100%.
Balance Sets the Balance of the effect. Ranges from L 100 to R 100.
Pedal This parameter is used to be controlled by the expression pedal to control Depth and Feedback. Range: 0 to 100.
Depth This parameter controls the amount of modulation depth in the phaser. Range is 0 to 100%.
Feedback This parameter controls amount of feedback in the phaser effect. Range is 0 to 100%.
Output A-B This parameter sets output of the pedal phaser effect. Range is from 0 to 100%.
Pan A-B This parameter sets pan of the pedal Phaser Range is from 0 to 100%.
Rotary Speaker Simulator
The Rotary Speaker Simulator allows you to emulate the classic rotating speaker sound, without the chiropractic problems that come with
moving bulky speaker cabinets. The Rotary speaker is directly responsible for some of the most unique sounds in music. The applications for
this effect are so diverse, it can be used to achieve sounds ranging from the Allman Brothers Band to the legendary Stevie Ray Vaughan.
A unique parameter in the Rotating Speaker simulation is the Acceleration parameter. This parameter is used emulate the the time that it takes
to get the Speaker up and spinning at full speed. The parameter can be assigned to a footswitch or the expression pedal so you can control the
acceleration speed.
Rotary Speaker Simulator Parameters:
FX: Lvl Controls the signal input level fed to the Module. Ranges from Off to 100%.
Dry: Lvl Controls the level of the dry (uneffected) signal. Ranges from Off to 100%.
Balance Controls the positioning of the dry signal in the stereo soundfield. Ranges from -99 (all left) to 99 (all right)
Mode Selects which speed mode the Rotor and Horn are in. Settings are fast or slow.
Spread Sets the horn stereo microphone spread. Ranges from 0 to 100%.
H - R: Level Sets the overall level of the Rotor or Horn. Ranges from Off to 100%.
Section - 4 Editing Modules RP-20 Valve
User Guide
40