3. Pressing the
<1>
button and then turning the
<Data>
wheel will turn the distortion type on and the
<4>
button and
<Data>
wheel
will select the default types of the distortion.
4. Once the distortion type has been selected, use the
<Next Page>
or
<Previous Page>
buttons to move to page 2 of the distortion type
menu. Page 2 lets you select and adjust distortion type and gain amount by pressing the
<2>
button then turning the
<Data>
wheel
you can select the distortion type. Pressing the
<4>
button and then turning the
<Data>
wheel you can adjust the gain.
5. Once the adjustments are made to the type and gain of the distortion type, make sure to store any changes
Analog Wah Editing
Analog Wah editing can be done by performing the following procedures:
1. From Program mode press the
<Preamp >
button until the Wah module is flashing. The display will appear something like this:
2. Pressing the
<1>
knob and then turning the
<Data>
wheel will either turn the Wah On or Off. The
<2>
button is used to activate the
Wah pedal range and the
<4>
button and
<Data>
wheel is used to select the Wah type.
3. The
<2>
(pedal parameter) can be assigned to the internal expression pedal. This is parameter can be selected by pressing the
<2>
button and then turning the
<Data>
and a
Changed
icon will appear directly beneath the parameter. At this point press the
<Assign>
button and the display will appear as follows:
Wah Pedal Toe Heavy
2
USER
byp
1
CHANGED
LINK
1
2
CHANGED
LINK
CHANGED
LINK
1
4
CHANGED
LINK
PAGE
1
OF
1
COMP
WAH
TUBE
EQ
L/R OUTS
DIGITAL
#
b
GATE
BANK
Type: Dirty Tube Gain
2
USER
1
CHANGED
LINK
3
2
CHANGED
LINK
3
CHANGED
LINK
45
4
CHANGED
LINK
PAGE
2
OF
2
COMP
WAH
TUBE
EQ
L/R OUTS
DIGITAL
#
b
GATE
BANK
Section - 2 Setting Up
RP-20 Valve
User Guide
20
Summary of Contents for RP-20 VALVE
Page 8: ...RP 20 Valve User Guide VI...
