Factory Reset
This function resets the BNX3 to its original factory settings. This procedure erases ALL custom user
presets, utility settings, and re-calibration of the Expression Pedal. The procedure for performing a
Factory Reset is as follows:
NOTE: Performing this function will erase all user-programmed data. Be sure you want to
erase the memory and start fresh before continuing with this procedure. A factory
reset does not erase the internal or external recorder memory.
1. Press the
UTILITY
button.The Utility button’s LED lights.
2. Using the
MODE
or
DRUMS
buttons, scroll to the left or right until
RESET
(Reset) is displayed.
3. Rotate the
DATA WHEEL
clockwise, until the display reads
NO Yes
(No Yes) and NO is blinking.
NOTE: This procedure resets ALL user settings. Rotate the DATA WHEEL
counterclockwise, or press EXIT while NO is blinking in the display to abort.
4. Press the
DRUMS
button. Yes begins blinking in the display.
5. Press
STORE
to reset the BNX3. The display returns to the Reset screen.
6. Press
EXIT
to return to the BNX3 presets.
Formatting Recorder Memory
In the unlikely event the recorder memory (either internal or external) fails to work, it may need to be
reformatted. If internal memory is to be reformatted, remove any memory cards from the BNX3’s
Memory Card slot before performing this procedure. If external memory cards are to be reformatted,
insert them into the Memory Card slot before performing this procedure
NOTE: Performing this procedure will erase all recorded information from either internal or
external memory. Be sure you want to erase this memory before continuing with
this procedure.
To reformat the BNX3’s recorder memory follow these steps:
1. Begin with the BNX3’s power turned off.
2. Press and hold the
RECORD
button on the BNX3’s recorder panel and turn the power on.
3.When the BNX3’s main display reads
format?
, release the
RECORD
button. It will now be flashing
red.
4. Press the
RECORD
button to begin the recorder memory formatting procedure. The display read
erasing
while the procedure is in progress. When completed, the display returns to the preset
screen.
G
EN
E
DIT
™ Editor/Librarian
The possibilities are endless when you install the G
EN
E
DIT
™ Editor/Librarian software on your home
computer. Before installing G
EN
E
DIT
™ on your Mac or PC, connect the computer’s MIDI output to the
BNX3’s MIDI input, and the BNX3’s MIDI output to the computer’s MIDI input.Then insert the
G
EN
E
DIT
™ CD ROM into the CD ROM drive on your computer, and follow the install instructions that
appear on the screen.
PC
If the install instructions do not appear automatically after inserting the CD, select
RUN
from the
Start menu, and double-click
SETUP.EXE
located on the CD ROM drive.
71
Other Functions
