DigiTech GeNetX BNX3, User Manual

Page: 30 / 82

Mod Level - The Parameter 5 knob controls the level ( mod levl ) of the Chorus. Ranges from 0 to
99.
Flanger
A Flanger uses the same principle as a Chorus but has a shorter delay time and adds regeneration (or
repeats) to the modulating delay. This results in an exaggerated up and down sweeping motion to the
effect.
Parameter 1 - The Parameter 2 knob adjusts the rate (
Speed
) of the modulation. Ranges from 1 to
99.
Parameter 2 - The Parameter 3 knob adjusts the intensity (
Depth
) of the Modulation. Ranges from
1 to 99.
Parameter 3 - The Parameter 4 knob adjusts the amount of feedback (
Regen
) added to the Flanger
delay. Ranges from 0 to 99.
* Parameter 4 - Selects the waveform used by the Flanger.Waveforms include: Triangle , Sine, and
Square.
* Parameter 5 - Adjusts the left to right balance of the wet signal. Ranges from L 99 to R 99.
Mod Mix - The Parameter 5 knob controls the mix ( mod mix ) of wet and dry signal. Ranges from 0
(all dry) to 99 (all wet).
Phaser
A Phaser splits the incoming signal, takes the split signal in and out of phase and mixes it back in with
the original signal. As the phasing changes, different frequencies are canceled resulting in a warm sort
of twisting sound.
Parameter 1 - The Parameter 2 knob adjusts the rate (
Speed
) of the modulating phase. Ranges
from 1 to 99.
Parameter 2 - The Parameter 3 knob adjusts the intensity (
Depth
) of the modulation. Ranges from
1 to 99.
Parameter 3 - The Parameter 4 knob adjusts the amount of effected signal returned to the input of
the Phaser (
Regen
). Ranges from 0 to 99.
* Parameter 4 - Selects the waveform used by the Phaser.Waveforms include: Triangle , Sine, and
Square.
* Parameter 5 - Adjusts the left to right balance of the wet signal. Ranges from L 99 to R 99.
Mod Mix - The Parameter 5 knob controls the mix (
mod mix
) of wet and dry signal. Ranges from 0
(all dry) to 99 (all wet).
Tremolo
A Tremolo effect modulates the volume of the signal at an even rate.
Parameter 1 - The Parameter 2 knob adjusts the rate (
Speed
) at which the volume modulates.
Ranges from 1 to 99.
Parameter 2 - The Parameter 3 knob adjusts the intensity (
Depth
) of the modulating volume.
Ranges from 0 to 99.
Parameter 3 - The Parameter 4 knob selects the type of wave form the modulation uses. Choices
include:Triangle , Sine, and Square.
The Parameter 5 knob does not function when the Tremolo is selected.
* These Parameters are only available using the G
EN
E
DIT
™ computer editor software.
25
Effects and Parameters