V-Switch Threshold
Applying extra pressure to the toe of the Expression Pedal engages a feature called V-Switch. V-Switch is
used to alternate between controlling assigned Parameter(s) with the pedal, and using the pedal as a Wah
pedal.The sensitivity of the V-Switch can be set to the amount of pressure you want to use. The following
steps explain how to set the V-Switch threshold:
1. Press the
UTILITY
button.The Utility button’s LED lights.
2. Using the
MODE
or
DRUMS
buttons, scroll to the left or right until
v SWItCH
(V-Switch).is
displayed
3. Rotate the
DATA WHEEL
to select the threshold setting. Ranges are from 1 to 99 (with 99 requiring
more pressure to engage).The sensitivity may be auditioned while making adjustments. Depending on
the status of the Wah the display reads either
WAH
On
, or
WAH
OF
as the V-Switch engages and
disengages.
4. Press
EXIT
to return to the BNX3 presets.
Expression Pedal Calibration
The Expression Pedal on the BNX3 needs to be recalibrated for use after a factory reset has been
performed. This calibration procedure is automatically activated after a factory reset procedure. In the
event the pedal’s calibration fails, or if the pedal does not function properly, it can be re-calibrated using
the Pedal Calibration menu.The procedure for Calibrating the Expression Pedal is as follows:
1. Press the
UTILITY
button. The Utility button’s LED lights.
2. Using the
MODE
or
DRUMS
buttons, scroll to the left or right until
pedalcal
is displayed.
3. Press the blinking
STORE
button to enter the Pedal Calibration Menu.The display reads
TOE DN
(Toe
Down).
4. Rock the Expression Pedal all the way forward to the toe down position and press the blinking number
2 Footswitch
.The display changes to read
TOE UP
(toe up).
5. Rock the Expression Pedal all the way back to the toe up position and press the blinking number 3
Footswitch
.
V SWiTCH
is displayed and allows you to adjust the V-Switch threshold.
6. Rock the Expression Pedal forward and apply the V-Switch pressure to the toe of the pedal. If further
adjustment to the threshold is required, use the Data Wheel to select the threshold.
NOTE: If the Display shows
ERROR
, a calibration error has occurred and steps 2 through 5
need to be repeated.
7. Press
EXIT
to return to the BNX3 presets.
Bank Names
The BNX3 lets you customize the names of the 13 User Banks where the 65 User presets reside.
Customized Bank names aids in quickly identifying the User Bank containing the presets you may need for
a particular song or set.The procedure for naming the User Banks is as follows:
1. Press the
UTILITY
button.The Utility button’s LED lights.
2. Using the
MODE
or
DRUMS
buttons, scroll to the left or right until
BANKS
is displayed.
3. Use the
DATA WHEEL
to select the User Bank you want to rename.
4. Press
STORE
to access the naming menu.The far left character of the Bank name begins to blink.
5. Use the
DATA WHEEL
to select the desired alpha-numeric character.
6. Press the
DRUMS
button to select the next character to the right, and the
MODE
button to select
the previous character to the left.
7. Repeat steps 5 and 6 until the Bank name appears in the display.
8. Once the Bank name appears correctly in the display, press
STORE
again.
namesavd
is displayed
briefly indicating the Bank name has been saved, and then new Bank name appears.
9. Press
EXIT
to return to the BNX3 presets.
67
Other Functions
