DigiTech BP-90, Owner'S Manual

Page: 9 / 48

3
up. The right 6 red LEDs indicate the note is sharp and should be tuned down. The center LED
indicates the note is in tune. The output is muted in Tuner mode; rock the Expression Pedal to
regain volume.
DRUMS DRUMS
EDIT
STORE
IN TUNE
VALUE
EFFECTS LIBRARY EFFECTS LIBRARY EFFECTS LEVEL EFFECTS LEVEL MASTER LEVEL MASTER LEVEL
PRESET LEVEL PRESET LEVEL
FRETLESS / WAH FRETLESS / WAH
COMPRESSOR COMPRESSOR COMPRESSOR
AMP / DISTORTION AMP / DISTORTION
EQUALIZER EQUALIZER
NOISE GATE NOISE GATE
CHORUS/FX CHORUS/FX
DELAY DELAY
REVERB REVERB
EXPRESSION EXPRESSION
PATTERN PATTERN
TEMPO
TEMPO
LEVEL LEVEL LEVEL
TONE LIBRARY TONE LIBRARY
BASS BASS
Display shows
note played
Right LEDs indicate
note is sharp
Center LED indicates
note is in tune
Left LEDs indicate
note is flat
In Tuner mode, you can change your tuning reference with the Value Up/Down buttons. The
default factory setting is A=440 Hz (displayed as
40
). Other tuning references are A=A flat (dis-
played as
Ab
), A=G (displayed as ), and A=G flat (displayed as
b
). The display window will briefly
flash the currently selected tuning preference.
Exit Tuner mode by pressing either Footswitch.