DigiTech BP-90, Owner'S Manual

Page: 21 / 48

15
Applying Power
Before applying power to anything, set your amp(s) to a clean tone and set the tone controls to
a flat EQ response (on most amps, this would be 0 or 5 on the tone controls). Then follow the
steps listed below.
1. Turn the amp volume all the way down.
2. Connect the plug of the power supply to the power jack on the rear panel of the BP90.
3. Connect the other end of the power supply to an AC outlet. Use the Master Level but-
ton and the Value Up/Down buttons to set the BP90’s Master Level to “0”.
4. Turn the power of your amplifier(s) to the on position and adjust the volume(s) to a nor-
mal playing level.
5. Use the Master Level button and the Value Up/Down buttons to gradually increase the
BP90’s Master Level to achieve the desired volume.
DRUMS DRUMS
EDIT
STORE
IN TUNE
VALUE
EFFECTS LIBRARY EFFECTS LIBRARY EFFECTS LEVEL EFFECTS LEVEL MASTER LEVEL MASTER LEVEL
PRESET LEVEL PRESET LEVEL
FRETLESS / WAH FRETLESS / WAH
COMPRESSOR COMPRESSOR COMPRESSOR
AMP / DISTORTION
AMP / DISTORTION
EQUALIZER EQUALIZER
NOISE GATE NOISE GATE
CHORUS/FX CHORUS/FX
DELAY DELAY
REVERB REVERB
EXPRESSION EXPRESSION
PATTERN PATTERN
TEMPO TEMPO
LEVEL LEVEL LEVEL
TONE LIBRARY
TONE LIBRARY
BASS BASS
DRUMS DRUMS
EDIT
STORE
IN TUNE
VALUE
EFFECTS LIBRARY EFFECTS LIBRARY EFFECTS LEVEL EFFECTS LEVEL MASTER LEVEL MASTER LEVEL
PRESET LEVEL PRESET LEVEL
FRETLESS / WAH FRETLESS / WAH
COMPRESSOR COMPRESSOR COMPRESSOR
AMP / DISTORTION AMP / DISTORTION
EQUALIZER EQUALIZER
NOISE GATE NOISE GATE
CHORUS/FX CHORUS/FX
DELAY
DELAY
REVERB REVERB
EXPRESSION EXPRESSION
PATTERN PATTERN
TEMPO TEMPO
LEVEL LEVEL LEVEL
TONE LIBRARY TONE LIBRARY
BASS BASS
4. Turn amp volume up
1. Turn amp volume down
2. Connect the power adapter to power jack
3. Connect the power adapter to
AC outlet and set the BP90’s Master
Level to “0”
5. Set the BP90’s Master Level to the
desired listening volume