DigiTech BP-90, Owner'S Manual

Page: 19 / 48

13
Stereo Operation
For stereo operation connect the bass to the Input of the BP90. Connect one cable to the
BP90’s Left (Mono) output, and another cable to the BP90’s Right output. Connect one cable
to the input of one amplifier, channel of a mixer, or power amp. Connect the second cable to a
second amplifier, second channel of a mixer, or power amp. If connecting to a mixing console, set
the pan controls of the mixer channels hard left and right in order to retain stereo separation. If
connecting to a mixer, set the Amp/Mixer switch to Mixer. If connecting to two amplifiers, set
the Amp/Mixer switch to Amp.
Stereo Amp Setup
Bass Amp Input/Effect Returns
Outputs Input
Amp/Mixer
switch set to
Amp.
DRUMS DRUMS EDIT
STORE
IN TUNE
VALUE
EFFECTS LIBRARY EFFECTS LIBRARY EFFECTS LEVEL EFFECTS LEVEL MASTER LEVEL MASTER LEVEL
PRESET LEVEL PRESET LEVEL
FRETLESS / WAH FRETLESS / WAH
COMPRESSOR COMPRESSOR COMPRESSOR
AMP / DISTORTION AMP / DISTORTION
EQUALIZER EQUALIZER
NOISE GATE NOISE GATE
CHORUS/FX CHORUS/FX
DELAY
DELAY
REVERB REVERB
EXPRESSION EXPRESSION
PATTERN PATTERN
TEMPO TEMPO
LEVEL LEVEL LEVEL
TONE LIBRARY TONE LIBRARY
BASS BASS
DRUMS DRUMS EDIT
STORE
IN TUNE
VALUE
EFFECTS LIBRARY EFFECTS LIBRARY EFFECTS LEVEL EFFECTS LEVEL MASTER LEVEL MASTER LEVEL
PRESET LEVEL PRESET LEVEL
FRETLESS / WAH FRETLESS / WAH
COMPRESSOR COMPRESSOR COMPRESSOR
AMP / DISTORTION AMP / DISTORTION
EQUALIZER EQUALIZER
NOISE GATE NOISE GATE
CHORUS/FX CHORUS/FX
DELAY DELAY
REVERB REVERB
EXPRESSION EXPRESSION
PATTERN PATTERN
TEMPO TEMPO
LEVEL LEVEL LEVEL
TONE LIBRARY TONE LIBRARY
BASS BASS
NOTE: When using a bass
amp, it may be best to con-
nect the Output of the BP90
to the effect return of the
amplifier.