Digitalstream DHR8202U, User Manual

Page: 24 / 64

Function Plus
PIP (Picture-in-Picture) Screen
The Function Plus is a very unique software feature of the product. While watching a programme, press the
FUNC+ on the front panel or the WHITE button on the remote control and then you can see a list of functions
which you can access them directly. The FUNC+ button can alter the four colour buttons as well as almost all of
the special buttons on the remote control. This makes it possible to use all of your products functions just by the
touch buttons on the front panel.
1. Press the FUNC+ button on the remote control or the FUNC+ button on the front panel.
2. Select a menu on the pop-up dialogue window using the ▲/▼ button and press OK button to proceed.
You can watch two services simultaneously on one screen by pressing the PIP button while watching TV. When
using the PIP, the audio from the main screen will be outputted. To exit the PIP mode, press the PIP button
again.
Note:
- The teletext (MHEG) is only available for the main screen.
- The PIP screen is also available while recording a programme or playing back
a recording. Some services may not be available for PIP if you record two
servies simultaneously.
- Only one scrambled (Pay TV) servies can be used with the PIP function.
- The PIP screen only supports SD services. The product does not support PIP for
HD services.
TIP:
Moving the PIP Screen
The position of the PIP screen can be moved by pressing the
◀/▶/▲/▼
button
when the PIP screen is displayed.
Switching Services in the PIP Screen
In PIP mode, press the PIP +/- button to change the services on the PIP screen.
Swapping the PIP Screen
You cannot use the SWAP function in the following cases:
1. When the main screen is a Radio service, the PIP does not support Radio services.
2. When the main screen is an HD service, the PIP does not support HD services.
3. When the main screen is a DATA service, the PIP does not support DATA services.
22