DL-SE3H1V-C Owners Manual
8
Installation Instructions
Quick Start
Mount the Switcher / Extender
1.
Mount the switcher / extender set
2.
Connect sources
3.
Connect display
4.
Connect audio output (optional)
5.
Connect control (optional)
6.
Apply power
At least 2 inches of free air space is required on both sides of the DL-SE3H1V-C for proper side ventilation.
Avoid mounting the DL-SE3HV1-C near a power amplifier or any other source of significant heat.
Attach the supplied mounting rails to the sides of the receiver. Once the rails are installed the receiver can be
mounted in an A/V enclosure or on the wall behind a display or above a projector.
Attach the supplied mounting rails to the sides of the transmitter. Once the rails are installed, the scaler is
ready to be mounted under a table.
VGA Video Input
Connect a VGA source device to the VGA input using a VGA cables that are less than or equal to 5 meters in
length. For source devices that are further away, a VGA extension device will be required to complete the
connection.
Connect HDMI source devices to the HDMI inputs using HDMI cables that are less than or equal to 5 meters
in length. For source devices that are further away, an extension device will be required to complete the
connection.
Connecting Sources
HDMI Input
