D-FORCE1400VA SLIDING GATE OPERATOR
2
ON
(see Fig.13B)
N.C. limit switch(spring limit)
OFF
N.O. limit switch(magnetic limit)
3
ON
When the 3 and 4 all OFF, the Auto-close
function is disable. When the 3 OFF and
the 4 is ON, auto-close time is near 12
Sec. when the 3 ON and the 4 is OFF
auto-close time is near 24 sec. when the 3
and the 4 is all in ON position, the auto-
close time is near 36 sec.
OFF
(see Fig.13C)
4
ON
OFF
(see Fig.13D)
NOTE:
(1)
You must follow the operating instruction as above, any
wrong operation is not allowed during setting. If your device
responds to your requested function correctly, you have set the
function successfully, otherwise repeat the above setup
instruction until your device responds to your expected
function.
(2)
If the gate can not be moved, please check whether the
gate is obstructed or the gate is too weight.
Activities Covered in this section
Remote transmitter:
With each press of the button, the gate will
close, stop, open or stop cycle.
(Single-button mode)
Three-button mode external button switch (not supply):
press
‘OPEN’ button, the gate opens. Press ‘STOP’ button, the gate stops.
Press ‘CLOSE’ button, the gate closes.
Single-button mode external button switch / keypad (not supply):
19
