Quick Start Guide for GPS150 V1.02
TEL + 44 1179 554474 www.digitalyacht.co.uk
Operating Modes
After changing the DIP switches, it is necessary to power cycle the GPS150 (turn off/on) before the new operating mode
becomes active. Check the LED to make sure that the expected baud rate is active.
Switches
1234
MODE
SATELLITES
BAUD
RATE NMEA DATA
GPS 105 Mode (default)
GPS
4800
1 HZ GGA/GLL/RMC/GSV/GSA/VTG/ZDA
GPS 6Hz Mode 4800 Baud
GPS
4800
6 HZ RMC
GPS+GLONASS Minimum Sentences
GPS+GLONASS
4800
1 HZ RMC/GSV/GSA
GPS+GLONASS All Sentences 1Hz
GPS+GLONASS
38400
1 HZ GGA/GLL/RMC/GSV/GSA/VTG/ZDA
GPS+GLONASS All Sentences
GPS+GLONASS
38400
6 HZ GGA/GLL/RMC/GSV*/GSA*/VTG/ZDA*
GPS+GLONASS Standard Sentences
GPS+GLONASS
38400
10 HZ GGA/RMC/GSV*/GSA*
GLONASS 1Hz All Sentences
GLONASS
4800
1 HZ GGA/GLL/RMC/GSV*/GSA*/VTG/ZDA*
GLONASS 6Hz Minimum Sentences
GLONASS
4800
6 HZ RMC
Full "Turbo" Mode
GPS+GLONASS
115000
10 HZ GGA/GLL/RMC/GSV*/GSA*/VTG/ZDA*
* These sentences output at 1HZ
Summary of Contents for GPS150
Page 1: ......
