Digital Watchdog VMax Flex DW-VF16 User Manual Download

Page: 29 / 127

User’s Manual | 28

2.9.2

First Data

Go to the first screen of the recorded videos. This is the oldest recorded video.

2.9.3

Last Data

Go to the last screen of the recorded video. This is the most recent recorded video.

2.9.4

Event Log

The Event Log Search finds particular events, quickly and easily.

Click

button to playback the selected event data.

Copy the event list to a USB memory device in text file format. Insert the USB Memory Stick into the USB Port. Press [SCAN] button

to detect the USB stick and then press [EXPORT] to copy the log information to the media.

To see a particular event, click the arrow buttons on the Remote Controller to the desired time range.

The following are the categories indicated on the Event Viewer.

Alarm by Sensor

Alarm by Motion

Alarm by Video Loss

Alarm by HDD Full

Note

If the Alarm does not activate even after the alarm input setting has been made, check the alarm
connection port of the DVR rear panel.

Summary of Contents for VMax Flex DW-VF16
































































































































Search results

Summary of Contents for VMax Flex DW-VF16

Reviews:

Related manuals for VMax Flex DW-VF16

Brands by name

Popular brands

Digital Watchdog VMax Flex DW-VF16, User Manual

Search results

Summary of Contents for VMax Flex DW-VF16

Reviews:

Related manuals for VMax Flex DW-VF16

Brands by name

Popular brands