Installation -
Installation Using Mount Bolt
s
and
Nut
s
9
Monting template
1.
Using the mounting template
for the nuts
and bolts installation,
mark and drill
the
necessary holes in the wall or ceiling.
2.
Pass the wires through and make all
necessary connections. See
page 12 for
more information.
3.
Secure the two long mounting screws to
the camera’s base.
4.
Mount the camera to the
mounting surface
using
the 2 mounting nuts.
5.
Rotate the locking
discs over the screws
until the camera is held
tightly from the
mounting surface.
6.
Adjust the camera’s lens position to the
necessary angle. the camera’s max tilting
angle is 75°.
7.
Assemble the dome cover over the
camera
body. Be sure to assemble the
dome and
bottom case to match the case
outline.
8.
When the installation is completed,
remove
the protective film.