manualshive.com logo in svg

Digital Watchdog MEGApix DWC-MVC8WiATW, User Manual, Page: 53 / 87

Share
Download
Digital Watchdog MEGApix DWC-MVC8WiATW User Manual Download Page 53

53

Recording List 

Setup - Record Setup

1

2

3

4

5

1

 

Storage - 

Select the Storage.

2

 

Filter -

 Select the date/time, event, sort, or storage format to filter the recorded video.

3

  Click the 'Refresh' button to refresh the records list.

 Click 'Filter' to view the filtered recorded video.

4

 

Recording List -

 Display the information to the recording video.

5

  Click 'Play' to view the selected item in the list of recorded videos.

 Click 'Remove' to delete the selected item in the list of recorded videos.
 Click 'Download' to download the selected item in list of recorded videos.

- When you click Download, the following window appears.
- When downloading, please fill-up the purpose within 30 characters. (The purpose you created is shown on the Log page with

the download time)

 When playing back recorded MP4 file format with H.265 (HEVC) codec, the video may not play due to the performance issue of VLC 

 plug-in.

Summary of Contents for MEGApix DWC-MVC8WiATW
























































































Reviews:

No comments