11
Installation -
Cabling
1.
Network cable - To connect an RJ45 cable to the
camera:
Option A (Recommended):
a.
Remove the grommet plug.
b.
Pass the network cable through the grommet
at the the base of the camera.
c.
Once the cables are through, add the RJ45
connector.
Option B:
a.
Attach the included RJ45 installation tool to
the network cable.
b.
Remove the grommet plug.
c.
Pass the network cable’s connector through
the grommet. Pay attention to the direction of
the grommet connection when connecting
cables.
d.
Once the cable’s connector is through, remove
the installation tool.
Once the network cable is passed through the grommet:
a.
Insert the grommet into the bottom case of
the camera.
NOTE: Bending the cable may cause water
leakage.
b. Connect the RJ45 into the camera’s network
input at the base of the camera.
a
b
c
1
a
b
c
d
e
2
Bending the cable may cause water leakage.
Use a cable with a diameter of ø5.0 ~ ø8.0mm