Digital Watchdog MEGApix DWC-MT95WiATW, User Manual, Page: 26 / 61

22
2. Click “Enable” and set the alarm holding time.
3. Set alarm trigger options. Trigger alarm out, Email and FTP. The setup steps
are the same as motion detection. Please refer to the
motion detection chapter
for details.

IP Address Conflict
This function is only available for models with alarm output.
1. Go to Config
>
Alarm
>
Anomaly
>
IP Address Collision as shown below.
2. Click “Enable alarm” and set the alarm holding time.
3. Trigger alarm out. When the IP address of the camera conflicts with the IP
address of other devices, the system will trigger the alarm out.

Cable Disconnection
This function is only available for the models with the Alarm Out interface.
1. Go to Config
>
Alarm
>
Anomaly
>
Cable Disconnected as shown below.