Digital Watchdog MEGApix DWC-MT95WiATW, User Manual, Page: 25 / 61

21
Move the “Sensitivity” scroll bar to set the sensitivity. A higher sensitivity value
means that motion will be triggered more easily.
Select “Add” and click “Draw”. Drag the mouse to draw the motion detection
area; Select “Erase” and drag the mouse to clear the motion detection area.
After that, click the “Save” to save the settings.
3. Set the schedule for motion detection. The schedule setup steps of the motion
detection are the same as the schedule recording setup (See
Schedule
Recording ).
5.3.2 Other Alarms

SD Card Full
1. Go to Config > Alarm > Anomaly > SD Card Full.
2. Click “Enable” and set the alarm holding time.
3. Set alarm trigger options. The setup steps are the same as motion detection.
Please refer to the motion detection chapter for details.

SD Card Error
When there are errors in writing on the SD card, an alarm will be triggered.
1. Go to Config
>
Alarm
>
Anomaly
>
SD Card Error as shown below.