User’s Manual | 34
4.1
System
4.1.1 System Info
The System Info sub-menu includes the following options: Date/ Time, HD output Resolution, Language, Remote ID, Version
& System Upgrade, Video Signal, IP & MAC Addresses, Keyboard Setup, NTP Setup, Display Setup, and Screen Saver
Setup.
-
Date/ Time
- Using the available options, manually
adjust the date and time, select the display mode for the
time and the date, and select the appropriate time zone.
If applicable, check the ‘USE DST’ box. See
3.12 DST
Setting
for more information.
-
HD Resolution
- Select the DVR’s output resolution.
DVRs support the following video resolutions:
1024x768, 1280x1024, 1920x1080, 3840x2160(4K no
support 4ch model.)
User must set the proper resolution according to the
monitor resolution
-
Language
- Select the DVR’s display language from the availanle in the drop-down menu.
-
Remote ID
- Set the DVR’s remote ID, which should be the same as the IR Remote Control (default ID is 1).
-
Firmware Version & upgrade
- when a new version is available use the easy upgrade menu to upgrade your DVR. It is
always recommended to maintain your DVR up to date with the latest firmware to guarantee the DVR’s proper
functionality. To upgrade your system:
Upgrading system using USB memory stick:
1.
Insert a USB drive with the firmware file formatted by FAT32 in any USB port of DVR (compatible with USB
2.0).
2.
Select ‘USB’ from the Method drop down options and press the ‘Scan’ button.
3.
Once the system detects the USB drive, it will display the firmware file under ‘Upgrade File Name’ and the
‘New Ver’.
4.
Click “OK” to confirm.