Digital Systems DS512, User Manual

Page: 28 / 52

Vehicle battery voltage = 12.08V
Power supply source change!
Power source: {vehicle battery / internal backup battery}
Due to the possibility to operate the DS512 with dedicated Android and iOS
mobile application TytanGPS the SMS with vehicle low battery and vehicle
power supply change may contain ceded information starting with ## marks.
This information shall be ignored.
RESENDING SMS RECEIVED BY DS512 TO THE FIRST PROGRAMMED MOBILE PHONE
NUMBER
The device can resend to the first programmed mobile phone number any
SMS received - e.g. sim card provider messages - low funds on pre-paid sim card
or others. Function may be enabled by installer of system.
ds512 alarm
28
The command can not be executed.
IMPORTANT!
After installation of Tytangps Alarm DS512 the DSPIN must be changed to your
personal vehicle code (instead default code: 12345) and the vehicle users
phone numbers must be programmed in order to prevent unauthorised access
to your vehicle.
SMS COMMAND DENIAL
When DS512 works as aftermarket VSS pager or OEM VSS pager (mode 1 or
mode 2) and receives one of SMS commands (alarmlog, clearlog, arm, disarm)
strictly concerning DS512 silent alarm or full alarm modes (mode 3 or mode 4)
the device will refuse to execute them and send a return SMS: