Rev A April 2011
Page 4.29
Digital Projection
TITAN WUXGA 3D, Dual 3D, 330. 660
User Manual
4. Controlling the projector
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
None of the Geometry controls
are available for Input 8.
Geometry Menu
Resolution
Input Detection should
normally be set to Automatic.
However, if the incoming video
signal is non-standard, the
projector may not be able to
select an appropriate input
mode.
In this case, Input Detection
should be set to Manual or
Custom.
Input Standard is available
only if Input Detection is set to
Manual.
WUXGA models only:
The full height of the DMD can
be used only by WUXGA and
UXGA images.
For more information, see
Screen requirements in
section 2. Installation.
Resolution
Press
and
to select Resolution.
Press
to open the Resolution submenu.
Input Detection
Press
and
to select from:
Automatic
Allows the projector to automatically detect an appropriate
input mode for the signal.
Manual
Allows the user to select an appropriate input mode from a list
of common standards.
Custom
Allows the user to completely customise the settings to suit the
incoming video signal.
When Input Detection is set to Manual:
Press
and
to select Input Standard.
Press
and
to select from:
720p
XGA
XGA+
SXGA-
SXGA
SXGA+
1080p
UXGA
WUXGA
VGA
NTSC
PAL
SVGA
•
•
•
•
Geometry menu continued
Downloaded From projector-manual.com Digital Projection Manuals
