Page 4.22
Rev A April 2011
4. Controlling the projector
Digital Projection
TITAN WUXGA 3D, Dual 3D, 330. 660
User Manual
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
Some menu controls can be
accessed directly using the
control keys (see earlier in this
section).
Input Menu
Presets
Save Presets A ~ H
The lens settings, ie Focus
position, Zoom position and
Shift, are included only for the
first ten presets.
The lens settings are the only
settings saved for Input 8.
Save Presets
Press
and
to select Save Preset.
Press
to open the Save Presets A ~ H submenu.
To save the current set of parameters, press
and
to select one of the
Presets.
For Presets J to S, select Save Preset J ~ S then press
to open the
J~S submenu. Press
and
to select the Preset.
Press
to confirm your selection.
If this Preset has been used before, but only if the Input source has been
changed, then the following message will be displayed.
Press
and
to select either OK or Cancel.
Press
to confirm your selection.
The parameters will be saved to the selected preset, and the following message
will be displayed.
•
•
Input menu continued
Downloaded From projector-manual.com Digital Projection Manuals
