Page 4.10
Rev A April 2011
4. Controlling the projector
Digital Projection
TITAN WUXGA 3D, Dual 3D, 330. 660
User Manual
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
Many features are controlled
from the menus using the menu
navigation keys
on the remote
control or keypad.
For more information about
using the menus, see later in
this section,
Using the menus
.
Some of the menu features, for
example brightness, contrast
and input preset operations, can
be accessed directly using the
control keys at the bottom of
the remote control.
Other features, eg zoom and
focus, are controlled using the
control keys at the top of the
remote control and keypad.
For more information about
using the control keys, see
later in this section, Using the
control keys
.
The Lamp 2 indicator applies
only to Titan Dual models.
The control panel
Keypad layout
The controls on the keypad are identical to those at the top of the remote control,
and are described on the following pages.
Projector status indicators
The indicators on the control panel are as follows:
Power
off =
NO POWER
green
= normal RUNNING mode
amber
= STANDBY mode
Shutter
amber
= CLOSED
green
= OPEN
Error
off
= NO ERROR
flashing
= ERROR (temperature)
steady
= ERROR (voltage)
IR
blue flash
= Remote control command received
Lamp 1
off =
OFF
flashing red
= LAMP ERROR
green
= ON (100%)
amber
= (80 - 99%)
flashing green
= LAMP WARM-UP
flashing amber
= COOL-DOWN
Lamp 2
off =
OFF
flashing red
= LAMP ERROR
green
= ON (100%)
amber
= (80 - 99%)
flashing green
= LAMP WARM-UP
flashing amber
= COOL-DOWN
Downloaded From projector-manual.com Digital Projection Manuals
