Page 4.8
Rev A April 2011
4. Controlling the projector
Digital Projection
TITAN WUXGA 3D, Dual 3D, 330. 660
User Manual
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Special considerations when using Input 8
Differences between Input 8 and Inputs 1-7
Input 8 has been designed to offer the user access to a very high bandwidth digital
video path, free of the limitations inherent to standard image processing techniques.
As such, the image is pixel-mapped directly to the DMDs, so only a subset of the
Image Controls applicable to Inputs 1-7 apply to Input 8.
Projector level controls, such as input selection, lens and lamp control are all
applicable to Input 8, but modal settings are not. The menus affected are described
below.
Input and processing architecture
Menu considerations when using Input 8
The following menus are limited:
Input menu:
Input Presets are limited to the lens mount settings.
Picture menu:
Aspect Ratio setting is NOT available.
Geometry menu:
As the image is pixel-mapped directly to the DMDs, NONE of
the geometry settings are available.
Projector Setup menu:
Keystone adjustment is NOT available; Test Pattern is
limited to
100% Field (Corrected White)
.
Notes
For important information
about how Input 8 is used, see
notes like this one in the Notes
column, marked INPUT 8.
Downloaded From projector-manual.com Digital Projection Manuals
