Digital Projection
Titan Laser Series
Rev A January 2019
Page 20
Important Information
5.
The lens can now be pushed in further. Push the lens in firmly as far as it will go.
6. Turn the lens release lever
fully anti-clockwise so that it is
pointing downwards, to close the
lock fully.
4
Removing the lens
To remove the lens, reverse the procedure described in
Inserting a new lens
above:
1. Turn the release lever up to the mid-position, then pull the lens out as far as it will go.
2. Turn the release lever clockwise so it is pointing upwards, then pull the lens out completely.
Fitting a lens hood
FDA regulations requires that a lens Hood is permanently fitted when using the 4.16-6.96:1
lens with the Titan Laser range of projectors in the United States of America. Fitting can be
provided by your reseller or System Integrator.
1. Remove the six screws.
1
2. Remove the lens glass
4
1
